A 5 marla house is the most common family home in Pakistan, and the first question every owner asks before building one is simple: how much will it cost? The honest answer depends on how much you build, where you build and the finish you choose. This guide breaks the cost down into grey structure, finishing and labour, shows a worked example, and gives you a small calculator to test your own numbers before you talk to a contractor.
Quick answer: Construction cost is worked out as covered area × rate per square foot. A double storey 5 marla house usually has around 2,000 square feet of covered area. In August 2026, one widely used online construction cost calculator put the total rate for a 5 marla house in Karachi at about Rs 4,700 per square foot, which comes to roughly Rs 95 lakh for grey structure, finishing and labour together. Your real figure will change with the city, material prices and finish level.
5 Marla House Construction Cost Calculator
Choose the number of storeys or type your own covered area, enter a rate per square foot from your contractor, and press Calculate. The split between grey structure, finishing and labour is based on typical shares, so treat it as a planning guide.
5 Marla Construction Cost Calculator
Ask local contractors for the current rate in your city before you fix your budget.
Step 1: Know Your Covered Area
A 5 marla plot is usually 1,125 square feet in housing societies that use a 225 square feet marla. You cannot build on all of it: the society bylaws set open spaces at the front and back and a limit on how much of the plot can be covered. As a rough guide:
- Single storey: around 900 to 1,000 square feet of covered area
- Double storey: around 1,800 to 2,100 square feet
- Two and a half storeys (with a mumty and a small room on the roof): up to about 2,800 square feet
Get the exact allowed area from your approved map. If you are not sure how big your marla is, read our guide to marla to square feet.
Step 2: Grey Structure Cost
The grey structure is the skeleton of the house: excavation, foundation, columns, beams, brick walls, roof slabs, plaster, and the electrical and plumbing pipes inside the walls. Steel, cement, bricks, sand and crush make up most of this cost.
In most estimates, grey structure material is about half of the total. On a Rs 95 lakh house, that is roughly Rs 47 to 48 lakh. Because steel and cement prices move often, ask for a fresh quote before you start, and lock prices for the first stage if you can.
Step 3: Finishing Cost
Finishing turns the grey structure into a home: tiles or marble, doors and windows, kitchen cabinets, bathroom fittings, paint, electrical fittings and woodwork. It usually takes a little under 40% of the total, but it varies the most, because two houses with the same structure can have very different finishes.
- Standard finish: local tiles, basic fittings and simple woodwork
- Good finish: better tiles, branded fittings and a fitted kitchen
- Premium finish: marble or imported tiles, high-end fittings and custom woodwork
Decide your finish level before construction starts, and write it into the contract.
Step 4: Labour Cost
Labour is usually around 10 to 12% of the total. You can hire a contractor for labour only and buy the material yourself, or give a contract with material at a fixed rate per square foot. Labour-only gives you more control over quality; a contract with material saves your time but needs a written list of brands and grades.
A Worked Example
Take a double storey 5 marla house with 2,000 square feet of covered area, at Rs 4,700 per square foot:
- Total construction cost: 2,000 × 4,700 = Rs 94 lakh
- Grey structure material (about 50%): Rs 47 lakh
- Finishing material (about 39%): Rs 36.7 lakh
- Labour (about 11%): Rs 10.3 lakh
- Safety margin of 10%: Rs 9.4 lakh more
Costs That Are Not Part of Construction
- Map approval fees from the society or development authority
- Utility connections for electricity, gas and water
- An architect or engineer for drawings and site visits
- Boundary wall, gate and landscaping, if not in the contract
Ways to Keep the Cost Under Control
- Get three written quotes with the same specifications.
- Pay in stages: after the foundation, each slab and the plaster. Never pay everything in advance.
- Keep design changes to a minimum once work starts.
- Visit the site regularly, or pay an engineer to check key stages such as the steel before each slab is poured.
- Keep a 10% margin for price rises and surprises.
Thinking of buying a ready house instead of building one? Compare the cost above with current prices on Pakistan Property, and see our guide to affordable houses for sale in Lahore.
Frequently Asked Questions
1. How Much Does It Cost to Build a 5 Marla House?
Multiply the covered area by the current rate per square foot. For a double storey house of about 2,000 square feet at Rs 4,700 per square foot, the total is about Rs 94 lakh, plus a safety margin.
2. What Is the Grey Structure Cost of a 5 Marla House?
Grey structure material is usually about half of the total cost. In the example above, that is roughly Rs 47 lakh.
3. How Long Does It Take to Build a 5 Marla House?
A double storey 5 marla house usually takes around 8 to 12 months, depending on the contractor, weather and how quickly payments and materials arrive.
4. Is It Cheaper to Build or Buy?
Building can cost less if you already own the plot and manage the work well. Buying is faster and avoids construction risk. Compare both on the same area and finish.
5. Why Do Construction Rates Differ Between Cities?
Labour costs, transport of material and local demand differ by city, so the same house can cost more in one city than another.
Comments
Post a Comment